rediff.com
Hi Guest
Log in | Sign up
Skip to content
Categories:

This MAY BE LAST POST FROM ME, IT ALL WILL DEPEND ON THE OUT COME OF TODAYS CASE. BUT BEFORE FAREWELL ON PRINTER CATRID

This may be my last post, depending on the out come of the decision of Justice Radhakrishnan and Justice Dalvi at 2.30 p.m.  Case detail is given in the image which is given at the end.


If this is the last post, then see you in the next world (if what the religions teach is truth).  If not, then it does not make any difference, because then, we will be earth and water.


Since you will be living here after me, I will say to the Indians and other people of the third world country one last thing.  That is, if they think that, they are fools, and then they cannot invent anything.  Now Lexmark printer is 1700 Rupees (Only black ink cartridge will be there ' but that is enough for most purposes).  And if you want color cartridge you can buy it separately.  But its cartridge Black original is Rupees 850.  We can easily refill it.  Refill people here charges Rs. 50. 


Now if Indian people are innovative they can easily make easily refillable cartridges (both black one and color one).  But none of the big companies will make this.  None of the small companies make this, because they are afraid to think that way. 


Any printer, can have a easily refillable cartridges.  Once you buy a printer what way to use it is our choice. 


IF SOME ONE MAKE THIS CATRIDGES ALL THE PEOPLE IN THE VILLAGES CAN USE PRINTERS AT A VERY CHEAP COST.  TO FILL BLACK INK IT WILL COME ONLY Rs. 5 rupees and even a village school child will be able to use Printer for printing, either in school or in their house or village library computers.  Joy


(IF YOU DO NOT HEAR FROM ME AGAIN, THINK THAT I AM DEAD.) 

Posted in Last post?.

8 comments

By Joy Kaidharath – November 21, 2007


123 Sucker pipes in WIND ENERGY & REGULATER

 Next problem to solve in Wind Fan is the flow of the wind is not equal, so we cannot get steady electricity at all time.  As I told earlier, that is a simple problem.

Calculate how much energy is needed for pumping the equal water (or if needed some more) that goes down to the generator (Bottom of the mountain), simultaneously to the upper tank of the mountain (Intake tank of the Penstock pipe)

 Calculate how many small generators are needed for the generation of this much energy.  Now calculate how much water has to be lifted up to 75 meter high tank for these generators to work one full day.  Create one tank or several tanks. BUT WHEN CREATING TANKS CREATE TANK (OR TANKS) WHICH COULD AT A TIME STORE WATER FOR 30 DAYS.  If creating that much big tanks on pillar is very difficult, create the tanks on the ground. That is base of the tank on the ground level of the mountain top and build it up. 

Now you may be thinking, then how the water will fall on the small generator turbine.  That is easy.  On one side of the mountain, remove sand may in a measurement of 25-meter wide, 30-meter length and 100 meter depth.  Create a tank there at that level may be 10-meter depth.  On the top of the tank put strong concrete beams.  On these concrete beams establish small generators that we talked before.  But establish extra two generators for pumping water to wind fan base tanks.  These base tanks are necessary in this case.  If we transmit the power of wind fans through piston shafts then we will lose lot of power.  But create wind fan base tanks and make the pistons to pump the water to main tank, which would contain water for thirty days.  WHY THAT MUCH WATER?  BECAUSE WITHIN 30 DAYS ANY WAY THERE WILL BE WIND. 

Now another problem is when the level of the water tank goes down the speed of the generators will come down.  That can be used by wind energy regulatory tanks.  That is a tank small in size created each tank for each generator.  We may not even need a tank for this.  PVC tanks that will contain 2000 litter water will be enough.  Now from the Main 30 day storage tank, make the necessary water connection to PVC tank.  This PVC tank will be Just below the storage level of 30 day tank.  Now how will we control the over flow of this PVC tank.  Use Toilet Flush balls (The air balls which we use in the toilet flushes to stop water once the flesh tank is full).  Use that system also.  So the variation in the level of the falling energy would be that of three to four inches.  We can adjust the movement of the flush balls by reducing its handle length. 

All that problems are solved.  Now I think there is only one more major problem.  That is named as 123 sucking problem.  It is named as 123 sucking problem, because we will have to use pipes which will have to be counted as 1, 2, 3, ..  What is the need of this? This will be needed to avoid the big water swirl when the water goes in high speed to down, through Penstock pipe.  So this system is used in penstock intake tank. (123 sucker pipe image is given below) after that old links)

Follow up of:

Wind Energy Fan Rotation Structure plan

http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195481183

WIND ENERGY PISTON valve system, BUT BEFORE THAT SOME PERSONAL NEWS:-
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195471609

Energy by wind pressure & waterhttp://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195455388

Mathran hills Electricity Project for Maharashtra
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195272450

WIND ENERY CAN BE USED INSTEAD OF CRUDE OIL
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195188411

WIND ENERGY WATER TANK DIAGRAMS http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195116198

ELECTRICITY FROM WIND WATER SEA http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195127364

FAN DIRECTION & PISTON WORK IN WIND ENERGY

http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195186047

 

Posted in wind: 123 SUCKER PIPES.

No comments

By Joy Kaidharath – November 20, 2007


Wind Energy Fan Rotation Structure plan



Follow up of:

WIND ENERGY PISTON valve system, BUT BEFORE THAT SOME PERSONAL NEWS:-
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195471609

Energy by wind pressure & waterhttp://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195455388

Mathran hills Electricity Project for Maharashtra
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195272450

WIND ENERY CAN BE USED INSTEAD OF CRUDE OIL
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195188411

WIND ENERGY WATER TANK DIAGRAMS http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195116198

ELECTRICITY FROM WIND WATER SEA http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195127364

FAN DIRECTION & PISTON WORK IN WIND ENERGY

http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195186047

 

Posted in wind-Fan-Structure.

No comments

By Joy Kaidharath – November 19, 2007


WIND ENERGY PISTON valve system, BUT BEFORE THAT SOME PERSONAL NEWS:-

WIND ENERGY PISTONS, BUT BEFORE THAT SOME PERSONAL NEWS:-

You would not have seen this post today. 

Reason:- I was going to end my life today, if Justice Radhakrishan had rejected the Review petition. 

Reason: As I told earlier, there is no point in living in a country and a world were I am denied justice.  I actually told my father and mother.  But the court officer told that the Review petition would be heard on 21st (Wednesday) 2007at two thirty in the Chamber of Justice Radhakrishnan. 

I have to serve the review petition and letter to the Defendants tomorrow. 

IF AS PER ME I AM NOT GETTING AN OBJECTIVE JUSTICE, THEN YOU WILL NOT HEAR FROM ME FROM 21ST (WEDNESDAY) 2007.  I AM NOT GOING TO BEG FOR MERCY FROM ANY BODY, all that drama is over much time before. 

Today I have actually written down the names of the people who will be responsible for my death, in case if I do not get justice.  I WILL BE VERY OBJECTIVE ' EVEN IN THE DECISION TO LIVE OR NOT TO LIVE. Joy

Now the piston and its working in Wind mill.

Next thing in this wind water energy is How can we utilize the wind energy to re-pump the water to the top of the mountain (1250 meter)

Very simple:  Use electric motors (pumps).

Here the argument would be, one: equal power will be wasted: no ' use slop method: slope is given with the piston.

45 degree ankle will reduce pumping pressure.  (Some modern pumps also will reduce)

For pumping 480 cm3 water to 1000 feet up we will have to spend 2000 kilowatt-hours energy. 

Energy can be attained by wind energy.  Presently we are not able to use the wind energy effectively.  Reason they say is that, wind is not there always, wind goes fast and slow etc.

Piston to be used in wind: Either Pump (Common Water pump image given) or the piston model I have drawn in the wind water tank (image given at the end)

http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195116198

Now the problem some raise is if piston is used then when the speed gets more, then piston will break.  No it will not. Kindly see the making of the piston 

First piston image, with outward and inward opening valves, then slope model, then pump (common water pump), then wind water tank repost, then links to old post





Follow up of:

Energy by wind pressure & water

http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195455388

Mathran hills Electricity Project for Maharashtra
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195272450

WIND ENERY CAN BE USED INSTEAD OF CRUDE OIL
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195188411

WIND ENERGY WATER TANK DIAGRAMS http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195116198

ELECTRICITY FROM WIND WATER SEA http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195127364

FAN DIRECTION & PISTON WORK IN WIND ENERGY

http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195186047

Posted in WIND PISTON VALVE.

1 comment

By Joy Kaidharath – November 19, 2007


Energy by wind pressure & water

Follow up of Mathran hills Electricity Project for Maharashtra
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195272450

Other links and calculations of power pressure etc., at the end

WIND ENERY CAN BE USED INSTEAD OF CRUDE OIL
http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195188411

WIND ENERGY WATER TANK DIAGRAMS http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195116198

ELECTRICITY FROM WIND WATER SEA http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195127364

FAN DIRECTION & PISTON WORK IN WIND ENERGY

http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195186047

Volume of a Cylinder (Pipe from the top to bottom ' established in 90 degree vertical) = ð(r2)h, where h = height

Using the formula for the volume of a cylinder (v = ð r 2 h) where

v = 3.1416 X 2.52 X 1250. Keep in mind the fact that the diameter is twice the radius,

therefore, the value of r is 2.5 meter.

 

V =   3.1416 {(2.5 X 2.5) X 1250} =  24543.75 cm3

 

For example, 1000 kilograms of water (1 cubic meter) at the top of a 100 meter tower has a potential energy of about 0.272 kW·h

 

24543.75  X .272 = 6675.9 kW.h potential energy ( 6.6759 megawatt 'hour) (but here the potential energy is much more)

 

One question would be how this cylinder could be supported. Mountain side can be used, towers with cupplings can ge used, concrete structure in one or two part can be used. It can be dugged in to mounter and at the end the nosile part can be taken out .etc many supporting system can be used.

 

 

Conversions:

Ptop

 = 

1  

atmosphere

 = 

101325.00000005  

newton/meter^2

p

 = 

9.8  

kilogram/meter^3

 = 

9.8  

kilogram/meter^3

g

 = 

9.8  

meter/second^2

 = 

9.8  

meter/second^2

h

 = 

1250  

meter

 = 

1250  

meter

 


Solution:

pressure at the bottom of the column (Pbottom)

 = 

221375.00000005 

newton/meter^2



Other Units:

pressure at the bottom of the column (Pbottom)

 = 

221375.00000005  

pascal

pressure at the bottom of the column (Pbottom)

 = 

2.1848013816919  

atmosphere

pressure at the bottom of the column (Pbottom)

 = 

2.2137500000005  

bar

pressure at the bottom of the column (Pbottom)

 = 

2213750.0000005  

dyne/centimeter^2

pressure at the bottom of the column (Pbottom)

 = 

74.135656111005  

foot of water

pressure at the bottom of the column (Pbottom)

 = 

65.372009845897  

inch of mercury

pressure at the bottom of the column (Pbottom)

 = 

889.62787333083  

inch of water

pressure at the bottom of the column (Pbottom)

 = 

221.37500000005  

kilonewton/meter^2

pressure at the bottom of the column (Pbottom)

 = 

2213.7500000005  

millibar

pressure at the bottom of the column (Pbottom)

 = 

1660.4490500863  

millimeter of mercury

pressure at the bottom of the column (Pbottom)

 = 

221375.00000005  

newton/meter^2

pressure at the bottom of the column (Pbottom)

 = 

4623.513003361  

pound/foot^2

pressure at the bottom of the column (Pbottom)

 = 

32.107729189987  

pound/inch^2

pressure at the bottom of the column (Pbottom)

 = 

1660.4490500863  

torr

 

 

Conversions:

pressure

 = 

221.37  

kilonewton/meter^2

 = 

221370  

newton/meter^2

area

 = 

1.7  

foot^2

 = 

0.157935168  

meter^2

 


Solution:

force

 = 

34962.10814016 

newton



Other Units:

force

 = 

34962.10814016  

newton

force

 = 

3496210814.016  

dyne

force

 = 

3565142.8510409  

gram force

force

 = 

34962.10814016  

kilogram-meter/second^2

force

 = 

3565.1428510409  

kilogram force

force

 = 

7.859794579528  

kip

force

 = 

7859.7945711527  

pound force

force

 = 

252881.41244528  

poundal

Posted in Wind pressure & water.

No comments

By Joy Kaidharath – November 19, 2007


Mathran hills Electricity Project for Maharashtra

Maharashtra government says that there is "Electricity" problem.  I do not understand why it is having Electricity problem.  Governement says it will take three to four years.  I would say, if Government want it can solve within two months the problem. 

What you need is a Real big tank at the real sea level of 'Mathran' hills. Make it a tank that is big enough to contain an amount of water that will contain five time of the water that it will take to pump the water to the height of Mathran hills, for bringing the water through penstock pipes. 

If we use fifty JCB and two hundred trucks it will take only one week to do this.   Concrete the bottom by using road concreting method, and this will take only one week.  It is not necessary to have side walls but if some one want that also it will take only 15 days, if we employ 200 workers, and road concreting machines.  (I am saying about that big truck with rotating things by which concrete work is being done ' I do not know its name). It may look like a small lake. 

Simultaneously Establish twenty horse power water engines (pumps) which will pump water from the bottom of the hill to the top of the hill where there are resorts.  If engineers say that, it is difficult to pump with one step, as per their direction build small tanks on the desired height simultaneously and there again establish twenty-house power water engine (pumps).  Acquire three acres of land where there resort is existing now (where people go to see the water falls during the rainy season). Establish there a tank that could contain two times of the water that will take to reach the bottom of the Matran hills by using tree pinestock pipes.  These all can do simultaneously.  This tank can be built on the ground itself.  You can even dig the ground and like we did at the down of the hill concrete the bottom and side.  This will avoid the danger of bursting after many years.   

Simultaneously order for penstock pipes and lay them safely which would reach from the top of the mountain to the ground water tank. 

Simultaneously order for Good three or four generators. Establish them as these works are being done.  At the same time do the works for connecting the electricity to the main existing lines.  OR YOU CAN ALSO ESTABLISH SOME WIND MILLS ON THE TOP OF THE MOUNTAIN AND CAN GENERATE INITIAL POWER FOR THE PUMBS.

As soon the work is ready to commission, start pumping the water using the electricity that is available now. Then Once Water reaches on the top send it through penstocks and make the generator work.  That same water can be used again and again.  And once the generater starts then use the electricity from it or from wind mills on the top of the mountain to work the Water pumps.

Once this is successfully done, make three or four units like this in Mathran.  (so there will be back up, if one fails) 

Do the same in Ratnagiri etc (In Ratnagiri, you even do not need ground water tank).  Make two units in one of the mountains there.

I do not understand what is the problem in doing these simple things.  If we can spend crores of Rupees for establishing Atomic energy, we can use and resues water or wind). Joy

Posted in Power-Maharashtra.

No comments

By Joy Kaidharath – November 17, 2007


WIND ENERY CAN BE USED INSTEAD OF CRUDE OIL

We do not have to have very high power generators at one place.  We can establish successive small once. 

Once if this is done, then we can also solve the problem of "Oil" and "Crude oil" problems. Because the making of the electricity would be without inferring any charge.  So we can have some units to just to make electricity for Dividing water in to Hydrogen and Oxygen.  That is by Anode and Cathode function.  That Hydrogen can be compressed like "gas" which is like LPG etc. this can be used as very eco-friendly fuel, in vehicles, factories, houses and in any place presently we use crude oil.  We would get water as out come.  And since the oxygen is produced in the process of dividing sea water (since there is salt, division would be easier), the burning oxygen to become water would not reduce the oxygen in the air.  Joy

Follow up of :

WIND ENERGY WATER TANK DIAGRAMS http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195116198

ELECTRICITY FROM WIND WATER SEA http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195127364

FAN DIRECTION & PISTON WORK IN WIND ENERGY

http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195186047

Posted in WIND TO CRUDE OIL.

4 comments

By Joy Kaidharath – November 16, 2007


FAN DIRECTION & PISTON WORK IN WIND ENERGY

Follow up posting of:


WIND ENERGY WATER TANK DIAGRAMS


http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195116198


ELECTRICITY FROM WIND WATER SEA


http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195127364


Piston in a wind energy works like high-powered water Engine.  Now the doubt of the people would be, how this will work. It is very simple.  The wind panel on the top (fans) should be fixed on a platform that can be rotated as per the direction of the wind.  That can be achieved by tail of the wind fan.  That is on the opposite side of the wind fans there should be an extended plate that has at its end a wide arrowed place.  That will decide the flow of the wind and that will help the wind fans to receive wind always to fans.  So as per the direction of the wind the wind fan head will automatically direct itself.


Secondly we have to convert this rotating head fans energy to a fixed gear which is connected either to a connecting shaft or to a chain which in turn will move the piston.  Piston model can be that of Engines in a motor vehicle.  That is when one piston goes up other comes down simultaneously.  Both this power water should be pumped in to common single pipe. Joy


 


Posted in WIND FAN-PISTON.

1 comment

By Joy Kaidharath – November 16, 2007


ELECTRICITY FROM WIND WATER SEA

I thought I will just go to bed after posting the wind energy diagram.  I had a quarter of whisky and good food.  I went to my rented room to sleep. Then I realized by wind energy we can actually solve all electricity connected problems.  How? 


Using wind energy.  Not kidding.  If some one would provide me money I will prove it.  Since I do not have money to prove it I will give idea to some one who want to do it.  


How do we make electricity from the water?  Water is made to fall from a very high place to a turbine and turbine help the generator to make electricity.


This can be done very easily without having to have any kind of dams.  For this we need around five to six acres of land near a sea.  Now you have to raise the water using wind energy.  Then make it to fall on turbine.  You will get energy.  Kindly see the wind energy piston model which I have given to solve the water problem IN:


http://joykj3.rediffiland.com/scripts/xanadu_diary_view.php?postId=1195116198


OR


http://joykaidharath.sulekha.com/blog/post/2007/11/wind-energy-water-tanks-which-do-not-need-electricity.htm


So from the sea the water has to be pumped in to a very high tank ' many plat formed tank can be used for this.  Near sea always there will be wind.  Then make the water to fall on turbine.  Make as many tanks, pistons and wind mills for this.  So the energy for falling could be attained.  Joy


Posted in ELECTRINCY-WIND.

No comments

By Joy Kaidharath – November 15, 2007


WIND ENERGY WATER TANK DIAGRAMS

Posted in WIND WATER TANK.

1 comment

By Joy Kaidharath – November 15, 2007