Skip to content


Basics Of Log Splitter

basic working of a Log Splitter is
used for splitting the firewood from the either hardwood or softwood logs. It
is a piece of machinery which works on round shape logs (basically these logs
previously have been cut into small-small section or parts); usually it is done
by saw bench or chainsaw. Many splitters can works on twelve ton vertical or
horizontal logs and consist of piston assembly with electric or hydraulic rod
which helps him to tow-able these heavy logs. So having this assembly the log
splitter can generate the lots of tons pressure and the higher the pressure
rating it can easily split the log which are greater in thickness or in length
of rounds.

The home purpose log splitter get the energized or power by an electric motor or by
gasoline or manly by petrol engine which driving a hydraulic pump with or
without a help of tractor and the non-electric model of log splitter mostly
uses on that location where the splitter can move easily and target to cut the
wood source and after that the split logs can simply loaded on the trailer,
truck and bulk bags. 

Some of the models of splitter have an
attachment that prevents the split logs from falling to the ground allowing the
operator to reposition the logs quickly for a second pass on the log splitter.
Some cone or screw splitters are mounted on a 3-point linkage of steel
platforms that allow the wood or log to be repeatedly split into smaller pieces
without putting them down and up again.

Posted in Log Splitters.

Tagged with , , , , .

0 Responses

Stay in touch with the conversation, subscribe to the RSS feed for comments on this post.

You must be logged in to post a comment.

Copyright © 2015 India Limited. All rights Reserved.  
Terms of Use  |   Disclaimer  |   Feedback  |   Advertise with us